Description
The ADAPT 2 Series products are double pronged adaptors in various heights for different platforms or applications. The ADAPT 2’s are ideal for angling pouches to the end-user’s preference. One side has 2 slick forks for mounting to MOLLE vests or belts, and even over non-MOLLE belts in some circumstances. The other side has holes for mounting a screw-on pouch. The bottom secures with screws, rubber spacers, and T-Posts.
The heights are specific to what you want to mount and the item you want to mount it to.
The ADAPT 2 EDC is 1.5” height, sometimes used in MOLLE belts but also found in some pouch configurations. If you are running a 1.5” belt, you want the ADAPT 2 EDC. Examples of use would be with the Haley Strategic® D3 Belt or the Subsecond Match 1.5 Gun Belt.
The ADAPT 2 MICRO is 1.75” height, typically used in micro MOLLE belts but also found in some pouch configurations. If you are running a 1.75” belt, you want the ADAPT 2 MICRO.
The ADAPT 2 SHORT is 2” height, typically used in duty belts or common MOLLE belts. It is also able to mount on any laser cut MOLLE areas where items can mount on a 2” space. If you are running a 2” belt, you want the ADAPT 2 SHORT.
The ADAPT 2 DUTY is 2.25” height, typically used in older traditional police duty belts. If you are running a 2.25” belt, you want the ADAPT 2 DUTY.
The ADAPT 2 REGULAR is 3” height, used primarily for traditional MOLLE spacing: having a 1” strap, a 1” gap, and another 1” strap. This is sized in a way to remove any unneeded vertical sliding.
The ADAPT 2 Series products are made out of .9mm CURV® material and are compatible with:
- Blade-Tech® Tek-Lok® hole patterns
- Safariland QLS, ELS, and standard hole patterns
- Blackhawk belt clips and hole pattern
** Blade-Tech Tek-Lok, pouch, and belt not included**
The ADAPT 2 REGULAR, ADAPT 2 DUTY and ADAPT 2 SHORT sizes come with:
- 1 x Adaptor
- 4 x 1/4” Screws
- 4 x 1/8” Rubber Spacers
- 4 x 3/8” Slotted Binding Post (Short T-Post)
The ADAPT 2 MICRO size comes with:
- 1 x Adaptor
- 4 x 1/4” Screws
- 4 x 1/8” Rubber Spacers
- 4 x 3/8” Slotted Binding Post (Short T-Post)
- 2 x Black Oxide Steel Flat Washers
(Additional Hardware can be purchased to give more contact points to the belt mount)
*Guardian Warrior Solutions does not recommend using the ADAPT Series to mount a firearm (See Bang Hanger). If a user chooses to mount less lethal items using the
ADAPT 2 Series, Guardian Warrior Solutions is not responsible for any negative outcomes associated.
*We recommend using the included thread locker on all included hardware.
All Guardian Warrior Solutions products are Made in America and are covered for life.
Joe Miller –
Get adaptor for MOLLE belts! I used the adapt 2 short to replace my teklok on my zero9 handcuff case. Worked perfectly and 1000x more stable when I need my cuffs. 10/10
Marcus –
I have this attached the back of my Axon BWC mini mount. I had to adjust some additional holes to make the screws fit but it mounted great and takes up 1000x less room on external vest. Way better then the Tecklock clip as far as the size and footprint. Super stable, no wobble or shifting with my camera.
Chase (verified owner) –
Great alternative to tek lok and similar mounts that dig into the waist and hips.
Peyton (verified owner) –
These are awesome to use with Xbelts! The versatility is endless!
Peyton –
These are excellent for mounting magazine pouches to your Molle vest!
Joe S. –
Great product! I’ve got them attached to a 2″ belt without molle and it still works great! Solid, secure and far less bulky than your standard belt mounting system.
Tyler H. –
This adapter was the best thing I ever did to my battle belt! Finally able to have Velcro available for the inner belt and NO PINCH POINTS. Night and day difference and incredible product! Best customer service and order process!